Fiber patch cords are used to make patch cords from the device to the fiber optic cabling link.
There is a thick protective layer, which is generally used in the connection between the optical transceiver and the terminal box, and is applied in some fields such as a fiber-optic communication system, a fiber access network, an optical fiber data transmission, and a local area network.
1.FC type optical fiber patch cord: The external reinforcement method is a metal sleeve, and the fastening method is a turnbuckle. Generally used on the ODF side (the most used on the patch panel)
2.SC type fiber patch cord: The connector that connects the GBIC optical module. Its outer casing is rectangular, and the fastening method is plug-and-pull type without rotating. (most used on router switches)
3.ST type fiber patch cord: commonly used in fiber distribution frame, the outer casing is round and the fastening method is screw buckle. (For 10Base-F connections, the connector is usually ST type. Commonly used for fiber distribution frames)
4.LC Fiber Patch Cable: A connector that connects to an SFP module. It is made with a convenient modular jack (RJ) latch mechanism. (used by routers)
1、tight-buffered fiber:
SM:G652D 0.6mm PVC cable
MM:50/125(OM3,OM4)、62.5/125 /0.6mm PVC cable
2、Stainless steel tube:
material:SUS204
Outer diameter:2.8+0.2mm;
Thickness: 0.2-0.3mm
Gap: 0.2~0.3mm
3、Aramid yarn:
model:1000DEN
Number:8 branches
4 jacket:
Material:PVC
Outer diameter:5.0±0.1mm
Thickness:0.95mm±0.05mm
Website information update ...