This product transmits HDMI audio and video signal up to 20KM by single mode fiber.
It supports TCP/IP network protocol over fiber switch, can transmit from one transmitter to multiple receivers and supports local HDMI output.
It support infrared pass-back remote control.
The device has long transmission distance, low cost, convenient installation and good compatibility.
- Aluminum shell with wall-mount, small and slim design
- Using Single mode Fiber to transmit 20KM
- Video resolution up to 1920*1080@60Hz
- The sender supports HDMI local output
- Support TCP/IP network protocol over Fiber switch
- Support for one sender to multi-receiver transmission via an optical switch
- Support infrared (38 Khz) signal return control
- HDMI 1.3 and HDCP 1.2 standards
- High compatibility, automatic matching of signal sources and display devices
- Built-in automatic adjustment system for smooth, clear and stable image
- Built-in ESD electrostatic protection circuit, easy to install, plug and play
- Real-time Video/Audio Transmission from HDMI to Fiber based on TCP/IP
|
Parameter
|
Description
|
|
Video
|
Standards
|
HDMI 1.3, HDCP 1.2
|
|
Maximum Pixel Clock
|
165MHz
|
|
Maximum Data Rate
|
6.75Gbps
|
|
Resolution Range
|
Max: 1920X1080@60Hz
|
|
Connector
|
Female HDMI Type A
|
|
Impedance
|
100Ω
|
|
Infrared
|
Interface
|
3.5mm Earphone Seat
|
|
Signal Type
|
Digital
|
|
Transmission Direction
|
Unidirectional
|
|
Carrier Frequency
|
38kHz
|
|
Optical Fiber
|
Interface
|
FC connector
|
|
Fiber Type
|
Single Mode
|
|
Wavelength
|
TX 1310nm; RX 1550nm
|
|
Interface Bandwidth
|
155Mbps
|
|
|
Transmission Distance
|
Standard: 20km
|
|
Other
|
Power Supply
|
The Power Adapter: DC 5V/2A
|
|
Power Dissipation
|
Max: 5W
|
|
Temperature
|
Operating: -5℃ ~ +70℃
|
|
Humidity
|
Operating: 5% ~ 90%
|
|
Dimension
|
100*97.5*18.6mm
|
