E-mail：sales@ingeel.com | Contact Us
NO BACK
4K@60Hz 20KM Fiber HDMI Extender with KVMINEX509T

20KM HDMI Fiber Optical KVM Extender


INEF5020K
20KM HDMI Fiber Optical Extender, support 1080P, IR
MSRP: Quote Upon Request
Contact Us

This HDMI extender over fiber is used to extend the transmission of HDMI audio and video signals, signal up to to 20KM through the fiber.  supports TCP/IP network protocol, can realize one transmitter to multiple receiver transmission through ethernet switches, remote transmission while supporting local HDMI output, support infrared return transmission. 

The equipment has a long transmission distance, low use cost, convenient installation, good compatibility, and is a stable and efficient transmission mode. Widely used in information release system, security monitoring, video conferencing system, HD teaching system, LCD splicing

 

 

1. Support Fiber Opctial cable (SC fiber) up to 20000 meters between TX and RX Extender.

2. Support HDMI1.3,HDCP 1.2 protocol compliant.

3. Support input/output resolution:480p,576p,720p,1080p.

4. Support point-to-point mode, one point-to-many mode.

5. Protocol compliant TCP/IP one transmitter and multiple receivers, with a maximum of 253 receivers.

6. Support IR 20~60KHz remote control ,  you can control STB or Blue-Ray DVD at receiving site.

7. Installs in minutes,No loss of quality.

 

 

HDMI Version--------------------------------------------------------------HDMI1.3a

Transmission distance ---------------------------------------------------  20000 meters

Transmitter Input Port --------------------------------------------------HDMIx1(AF)

Transmitter Output Ports -------------------HDMIx1(AF), SC Fiberx1, IR TXx1

Receiver Input Ports------------------------------------------SC Fiberx1, IR RXx1

Receiver Output Port----------------------------------------------------HDMIx1(AF)

Frequency Bandwidth--------------------------------------2.25Gbps (single link)

Input/Output Resolutions---------------------------------480p,576p,720p,1080p

Audio-------------------------------------------Sample rate:32kHz,44.1kHz,48kHz

IR remote control-----------------------------------------------------20~60KHz; NEC

ESD Protection Human Body Model ---------------± 8kV (air-gap discharge)    ± 4kV (contact discharge)

Operating Temperature--------------------------------0˚C ~ 40˚C / 32˚F ~ 104˚F

Storage Temperature ---------------------------------20˚C ~ 60˚C / -4˚F ~ 140˚F

Relative Humidity---------------------------------20~90% RH (non-condensing)

Dimensions (mm)-----------------------------------------------------------120x73x22

Website information update ...